2'' IC AT LED NEW CONSTRUCTION CAN BUILD IN DRIVER Galvanized steel construction plaster LED engine mounted frame-in with J-Box and captive hanger bar with real nail LED engine mounted Accessible to LED engine from below the ceiling LED Light Engine: LEDs are mounted directly to cast aluminum housing providing superior thermal management to ensure long life 80 or 90 CRI 2700K, 3000K, 4000K, 5000K available Accommodates 120 volts AC at 60Hz Dimmable with most standard incandescent, magnetic low voltage and electronic low voltage dimmers 120-277V available (Dimmable at 120V only) Listing: cULus Listed Energy star qualified Wet locations(Not suitable for coastal/salt water area) Damp locations RoHS compliances Tested in accordance with IESNA LM79 & LM80

2” IC AT LED REMODEL CAN BUILD IN DRIVER Galvanized steel construction plaster LED engine mounted frame-in with J-Box and captive hanger bar with real nail LED engine mounted Accessible to LED engine from below the ceiling LED Light Engine LEDs are mounted directly to cast aluminum housing providing superior thermal management to ensure long life 80 or 90 CRI 2700K, 3000K, 4000K, 5000K available Accommodates 120 volts AC at 60Hz Dimmable with most standard incandescent, magnetic low voltage and electronic low voltage dimmers 120-277V available (Dimmable at 120V only) Listings cULus Listed Energy star qualified Wet locations(Not suitable for coastal/salt water area) Damp locations RoHS compliances Tested in accordance with IESNA LM79 & LM80

LS 3R IC AT 3'' LED Can Remodel Junction Box: Listed for through branch circuit wiring, Contains ine 1- 1/8'', six 7/8 knockouts and four Romex pryouts with starin releif. Remodel Clips: For remodel clips secure housing and accommodates 1/2'' and 5/8'' ceiling materials. listings: cULus Listed Damp Location cULus Listed for Feed Trought Certified under ASTM-E283 for Air tight construction Meets State of California title 24 requirements

LS-4-IC-AT 4''LED CAN NEW CONSTRUCTION Size1 25 1/2'' X 10 7/8'' Size2 6 1/4'' X 4'' Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. operation of high power LED chip Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS 4R IC AT 4'' Remodel LED Can Size 1 4 3/4'' x 12 3/4 Size 2 6 1/4'' x 4'' Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. LED Engine 10~ 100 Dimmable with most dimmers. Heat Sink and aluminum board for low heat operation of high power LED chip Range of 3000k or 4000k color temp , 82 CRI Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS-2-243 SQUARE BAFFLE TRIM

2'' LED SQUARE BAFFLE TRIM DIMMABLE CCT: 2700k / 3000K / 4000k / 5000k LUMENS: 640lm CRI: >90 INPUT VOLTAGE: 120V INPUT POWER: 9w FREQUENCY: 50/60hZ DIMENSION: W 3 1/8 H 2 5/8 DIMMING: TRIAC

LS-3-IC-AT 3'' LED can NEW Construction Lightingsspot26 LED dedicated IC housing,LS-3-ic-at is designed for new construction installations and suitable for use ceiling where the housing can be direct contact with insulation. Air tight construction reduce energy cost by reducing the amount of air leakages trough the ceiling. Plaster Frame: Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box. Juction Box: Listed for through branch circuit wiring. Contains one 1-1/9'', six 7/8 knockouts and four Romex pry outs with strain relief. Bar Hanger: Pre-installed Real nail easily installs in regular lumber,engineered lumber. Bar Hangers are adjustable from 13-5/8'' to 25'' and can be re-positioned 90 degree on plaster frame. Listings: cULus Listed for DAMP Location cULus Listed for feed Trough Certified under ASTM-E283 for Air tight construction Meets state of California title 24 requirement

LS 4 S IC AT 4'' Shallow New Construction LED Can Plater Frame Galvanized steel contruction. The housu=ing can be removed from plaster frame to provide access to the juction box. Junction Box Listed for through branch circuit wirering. Contains on 1-1/8'',six 7/8 knockouts and four Romex pryouts with starain relief. Bar Hanger Pre-installed Real nail easily installs in regular lumber, engineered lumber. Bar Hangers are adjustable from 13-5/8'' to 25 and can be repositioned 90 degree on plaster frame. Listings cULus Listed fro Damp Location cULus Listed for feed Troughh Meets State California title 24 requirements Certified under ASTM-E283 for Air tight construction.

LS-45D-1616 Aluminum Profile 10FT 45* Degree Length : 10ft Height and width (mm) 16*16 Max Watt Per FT 6W Installation : 45* Degree Light Source Width : Max 10mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-4DW-IC-AT 5-1/2' -BLACK PAINTED LED CAN WITH ALUMINUM OUTER BOX 4”LED CAN NEW CONSTRUCTION Size 6''x 8 3/8'' Housing Double walled housing is for installation where the housing will be direct direct contact with insulation Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8” knockouts and four Romex playouts with strain relief. Hanger Box Pre-installed real nail easily installs in regular lumber, engineer lumber. Hanger bars are adjustable from 13-5/8'' to 25'' and can be predisposition 90 degree on plaster frame. Mounting frame galvanized steel construction Quick Connect Quick Connector for fast and easy wiring Listing cUL

LS26-4FR-ICAT 4" New Construction Recessed Housing FIRE RATED enclosure. New Specification Grade, FIRE RATED New Construction Recessed Downlight. Housing was designed to meet strict FIRE SAFETY CODES in COMMERCIAL & RESIDENTIAL application. UL Listed double wall incorporates a NON_COMBUSTIBLE FIBER INSULATION to prevent passage of FLAMES, TOXIC GASES and IGNITABLE GASES into the ceiling plenums. Rated for 2 hour protection. Extra insulation provided between ceiling and fire box. In addition, the NON COMBUSTIBLE FIBER MATERIAL FIBER FILL also acts as SOUND DAMPENING eliminating transfer of sound between floors. FEATURES: - UL LISTED CERTIFIED 1HR. TO 2HOURS FIRE RATED - ASTM-E283 AIRTIGHT RATED ENCLOSURE - APPLICABLE FOR IC AND NON-IC RATED CEILING - LED QUICK CONNECT PROVIDED - EXTEND UP TO 24 1/2" BAR HANGERS WITH CAPTIVE NAILS - CAN BE USED IN STANDARD APPLICATIONS AS SOUND DAMPENING ENCLOSURE BETWEEN FLOORS. - 8" X 5 1/2" FRAME PROFILE FOR EASY COMPACT INSTALLATION

LS-4FR-S-IC-AT 4" New Construction SHALLOW Housing 2HRS FIRE RATED enclosure. New Specification Grade, FIRE RATED New Construction Recessed Downlight. Housing was designed to meet strict FIRE SAFETY CODES in COMMERCIAL & RESIDENTIAL application. UL Listed double wall incorporates a NON_COMBUSTIBLE FIBER INSULATION to prevent passage of FLAMES, TOXIC GASES and IGNITABLE GASES into the ceiling plenums. Rated for 2 hour protection. Extra insulation provided between ceiling and fire box. In addition, the NON COMBUSTIBLE FIBER MATERIAL FIBER FILL also acts as SOUND DAMPENING eliminating transfer of sound between floors. FEATURES: - UL LISTED CERTIFIED 1HR. TO 2HOURS FIRE RATED - ASTM-E283 AIRTIGHT RATED ENCLOSURE - APPLICABLE FOR IC AND NON-IC RATED CEILING - LED QUICK CONNECT PROVIDED - EXTEND UP TO 24 1/2" BAR HANGERS WITH CAPTIVE NAILS - CAN BE USED IN STANDARD APPLICATIONS AS SOUND DAMPENING ENCLOSURE BETWEEN FLOORS. - 8" X 5 1/2" FRAME PROFILE FOR EASY COMPACT INSTALLATION

LS-4FT-2L 4FT Strip Fixture To be Used with 2pcs T8 LAMPS double ends wired . ** For lamp USE 4FT/T8 Type B wiring. Catalog Number ( LS2-T8 ) FEATURES: UL, damp Locations rated. To be Used with LED T8 tubes, Easy for lamp replacement and maintenance. Double ends wired. Available in 48inch and 96 inch. in 2 lamps model. Terminal block , quick disconnector from IDEAL or WAGO. Celling surface or pendant mount. Suitable for workshop, storage areas, display cabinets ,task lighting etc.

LS-4FT-2T840W*3CCT 3CCT LED 4FT STRIP LIGHT LAMP WATTAGE : 40W INPUT VOLTAGE : 120-277VAC CRI : >80 3CCT/LUMENS (3500K-4200lm/4000K-4200lm/5000-4600lm) EFFICACY : LUEMENS /WATTS 105-115 FEATURES: UL: Suitable for damp locations. Dimming: Insolate 0-10v dimming driver 120-277V Lifespan: 50,000-hrs LED Lifespan, 5 Year warranty 3CCT Selectable : 3500K/4000K/5000K , surge protector. Low profile design optimizes shipping ,storage, and handing Quick release design for easy installation Polycarbonate milky lens diffuse uniform lighting distribution Available for suspended by steam cable ,surface mounted and connective in a long row Integrated smart sensor box and emergency battery are optional Corridor, Storage rooms, Offices, Conference rooms, Retailers ,Reception areas ,Hallways ,Parking Garages.

LS-4FT-2T840W*3CCT/MS

LS-4FT-2T840W*3CCT/MS 3CCT LED 4FT STRIP LIGHT W/MOTION SENSOR LAMP WATTAGE : 40W INPUT VOLTAGE : 120-277VAC CRI : >80 3CCT/LUMENS (3500K-4200lm/4000K-4200lm/5000-4600lm) EFFICACY : LUEMENS /WATTS 105-115 FEATURES: UL: Suitable for damp locations. Dimming: Insolate 0-10v dimming driver 120-277V Lifespan: 50,000-hrs LED Lifespan, 5 Year warranty 3CCT Selectable : 3500K/4000K/5000K , surge protector. Low profile design optimizes shipping ,storage, and handing Quick release design for easy installation Polycarbonate milky lens diffuse uniform lighting distribution Available for suspended by steam cable ,surface mounted and connective in a long row Integrated smart sensor box and emergency battery are optional Corridor, Storage rooms, Offices, Conference rooms, Retailers ,Reception areas ,Hallways ,Parking Garages.

LS-4R-S-IC-AT Shallow Remodel LED Can Ceiling Thickness Housing adjusts from 5/8''-1 3/8'' to accommodate various ceiling thickness. Junction Box Listed for through branch circuit wirering. Contains on 1-1/8'',six 7/8 knockouts and four Romex pryouts with starain relief. Remodel Clips For remodel Clips secure housing and accommodates 1/2'' and 5/8'' ceiling materials. Listings cULus Listed fro Damp Location cULus Listed for feed Troughh Meets State California title 24 requirements Certified under ASTM-E283 for Air tight construction.

LS-5''SQ-IC-AT 5'' New Construction LED Frame Square D E S C R I P T I O N S Plaster Frame ■ Galvanized steel construction. The LED trim / module can be removed from plaster frame to provide access to the junction box and LED driver. Junction Box ■ Listed for through branch circuit wiring. ■ Contains one 1-1/8”, six 7/8” knockouts and four Romex pryouts with strain relief. Bar Hanger ■ Pre-installed Real nail easily installs in regular lumber, engineered lumber. ■ Bar Hangers are adjustable from 13-5/8” to 25” and can be repositioned 90 degree on plaster frame. LED Driver ■ Mounted on Junction Box cover for cool running and long life. ■ Dimmable up to 5% with standard incandescent or low voltage dimmers. ■ High efficiency driver with a power factor ≥90 with a power factor of 120V . 60Hz (120 / 277V available) Listings ■ cULus Listed for Damp Location ■ cULus Listed for Feed Through ■ Certified under ASTM-E283 for Air tight construction ■ Meets state of California title 24 requirement

LS-5-IC-AT Size1 25 1/2'' x 14'' Size2 7 3/4'' x 5 1/2'' Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. LED Engine 10~ 100 Dimmable with most dimmers. Heat Sink and aluminum board for low heat operation of high power LED chip Range of 3000k or 4000k color temp , 82 CRI Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS-5R-IC-AT 5'' Remodel LED Can Size1 1/2'' x 13'' Size2 7 3/4'' x 5 1/2 Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. LED Engine 10~ 100 Dimmable with most dimmers. Heat Sink and aluminum board for low heat operation of high power LED chip Range of 3000k or 4000k color temp , 82 CRI Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS-6''EM/BL 6" IC Recessed LED Black Color Emergency Light 4000K DESCRIPTION LS-6''EM is self-contained 6" emergency downlight that comes complete with recessed new construction housing, battery, and LED gimbal trim and compatible with drywall or drop ceiling mount installations. PAR36-type sealed beam gimbal trim with smooth chrome finish reflector offers optimal light distribution. INPUT VOLTAGE: 120V INPUT POWER : 3W FRECUENCY : 50/60Hz T AMBIENT : -30*C~40*C (-22*F-104*F) LUMENS : 120lm CRI : >90 Lamps operated: 15W Sealed Beam PAR36 (included) Input voltage: 120V or 277V 60Hz Battery: 6V 4.5Ah sealed lead-calcium battery LISTINGS cULus Listed (TYPE IC) Damp locations RoHS compliances Tested in accordance with IESNA LM79 & LM80 FEAUTURES Maintenance-free, rechargeable Sealed lead acid battery Preinstalled hanger bars Junction box with 3/4” knockouts for AC input Solid-state and two-rate charger for battery charging to recharge a discharged battery in 24 hours 45-degree adjustable gimbal ring with integrated indicator light and test switch 240 Min. Emergency Run Time 8ft (2.4m) Max Mounting Height 5 Years Battery Life Expectancy

LS-6''EM/WH 6" IC Recessed LED White Color Emergency Light 4000K DESCRIPTION LS-6''EM is self-contained 6" emergency downlight that comes complete with recessed new construction housing, battery, and LED gimbal trim and compatible with drywall or drop ceiling mount installations. PAR36-type sealed beam gimbal trim with smooth chrome finish reflector offers optimal light distribution. INPUT VOLTAGE: 120V INPUT POWER : 3W FRECUENCY : 50/60Hz T AMBIENT : -30*C~40*C (-22*F-104*F) LUMENS : 120lm CRI : >90 Lamps operated: 15W Sealed Beam PAR36 (included) Input voltage: 120V or 277V 60Hz Battery: 6V 4.5Ah sealed lead-calcium battery LISTINGS cULus Listed (TYPE IC) Damp locations RoHS compliances Tested in accordance with IESNA LM79 & LM80 FEAUTURES Maintenance-free, rechargeable Sealed lead acid battery Preinstalled hanger bars Junction box with 3/4” knockouts for AC input Solid-state and two-rate charger for battery charging to recharge a discharged battery in 24 hours 45-degree adjustable gimbal ring with integrated indicator light and test switch 240 Min. Emergency Run Time 8ft (2.4m) Max Mounting Height 5 Years Battery Life Expectancy

LS-6-IC-AT New Construction 6'' LED can Size1 25 1/2'' x 14'' Size2 7 1/2'' x 6 1/8'' Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. LED Engine 10~ 100 Dimmable with most dimmers. Heat Sink and aluminum board for low heat operation of high power LED chip Range of 3000k or 4000k color temp , 82 CRI Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS- 6-S-IC-AT 6'' Shallow New Construction LED Can Plater Frame Galvanized steel contruction. The housu=ing can be removed from plaster frame to provide access to the juction box. Junction Box Listed for through branch circuit wirering. Contains on 1-1/8'',six 7/8 knockouts and four Romex pryouts with starain relief. Bar Hanger Pre-installed Real nail easily installs in regular lumber, engineered lumber. Bar Hangers are adjustable from 13-5/8'' to 25 and can be repositioned 90 degree on plaster frame. Listings cULus Listed fro Damp Location cULus Listed for feed Troughh Meets State California title 24 requirements Certified under ASTM-E283 for Air tight construction.

LS-6FR-ICAT 2 HRS 6″ New Construction Recessed Housing FIRE RATED Enclosure. New Specification Grade, FIRE RATED New Construction Recessed Down light. Housing was designed to meet strict FIRE SAFETY CODES in COMMERCIAL & RESIDENTIAL application. UL Listed double wall incorporates a NON_COMBUSTIBLE FIBER INSULATION to prevent passage of FLAMES, TOXIC GASES and IGNITABLE GASES into the ceiling plenums. Rated for 2 hour protection. Extra insulation provided between ceiling and fire box. In addition, the NON COMBUSTIBLE FIBER MATERIAL FIBER FILL also acts as SOUND DAMPENING eliminating transfer of sound between floors. FEATURES: – UL LISTED CERTIFIED 1HR. TO 2HOURS FIRE RATED – ASTM-E283 AIRTIGHT RATED ENCLOSURE – APPLICABLE FOR IC AND NON-IC RATED CEILING – LED QUICK CONNECT PROVIDED – EXTEND UP TO 24 1/2″ BAR HANGERS WITH CAPTIVE NAILS – CAN BE USED IN STANDARD APPLICATIONS AS SOUND DAMPENING ENCLOSURE BETWEEN FLOORS. – 8″ X 12″ FRAME PROFILE FOR EASY COMPACT INSTALLATION 18w Maximum Wattage for 6inch retrofit downlight

LS-6R-IC-AT 6'' Remodel LED Can Size1 6 7/8 x 13 3/4 Size2 7 1/2'' x 6 1/8 Housing Single wall PAinted Steel Housing gasket for IC/Air Tight in Insulated Ceiling Housing can be adjusted for ceiling thickness up to 1-3/3/8'' Junction Box Listed For Trough Branch circuit wiring Contains seven 7/8'' knockouts and four Romex playouts with romex cable clamp Ground wire provided on J-Box. LED Engine 10~ 100 Dimmable with most dimmers. Heat Sink and aluminum board for low heat operation of high power LED chip Range of 3000k or 4000k color temp , 82 CRI Produces 565~ 801 lumen output from Luminaire operating by 350mA connect. Use 1.2 W High Power LED LED Power Supply Driver Class 2 constant current LED Driver 350mA For 120v, 50-60Hz Driver installed on junction box door for easy access from below ceiling Quick Connect PUSH TERMINAL Three QUICK CONNECTORS for fast easy wiring. LISTING CUL

LS 6R S IC AT 6''Shallow Remodel LED Can Ceiling Thickness Housing adjusts from 5/8''-1 3/8'' to accommodate various ceiling thickness. Junction Box Listed for through branch circuit wirering. Contains on 1-1/8'',six 7/8 knockouts and four Romex pryouts with starain relief. Remodel Clips For remodel Clips secure housing and accommodates 1/2'' and 5/8'' ceiling materials. Listings cULus Listed fro Damp Location cULus Listed for feed Troughh Meets State California title 24 requirements Certified under ASTM-E283 for Air tight construction.

LS-801M-5CCT 8'' LED Square Frame in / New construction / Dimmable (TRIAC) 120V

LS-801M-5CCT 8" LED Square Recessed Downlight 5CCT : 2700K/3000K/3500K/4000K/5000K SIZE : 8'' INPUT VOLTAGE : 120VAC LAMP WATTS : 18 EFFICIANCY : 83 LUMENS OUT PUT : 1500 CRI ; >90 Features • 5 CCTs selectable • Available at 120V or 120-277V • Wet Locations listed (Not suitable for coastal / salt water area) • cUL listed / ENERGY STAR certified • RoHS compliances • Tested in accordance with IESNA LM79 & LM80 • 5 year warranty

LS-8FT-4L 8FT Strip Fixture To be Used with 4pcs T8 LAMPS double ends wired . ** For lamp USE 4FT/T8 Type B wiring. Catalog Number ( LS2-T8 ) FEATURES: UL, damp Locations rated. To be Used with LED T8 tubes, Easy for lamp replacement and maintenance. Double ends wired. Available in 48inch and 96 inch. in 2 lamps model. Terminal block , quick disconnector from IDEAL or WAGO. Celling surface or pendant mount. Suitable for workshop, storage areas, display cabinets ,task lighting etc.

LS-8SQ-0-10V 8" LED Square Recessed Downlight 0-10V 5CCT : 2700K/3000K/3500K/4000K/5000K SIZE : 8'' INPUT VOLTAGE : 120VAC LAMP WATTS : 18 EFFICIANCY : 83 LUMENS OUT PUT : 1500 CRI : >90 Features • 5 CCTs selectable • Available at 120V or 120-277V • Wet Locations listed (Not suitable for coastal / salt water area) • cUL listed / ENERGY STAR certified • RoHS compliances • Tested in accordance with IESNA LM79 & LM80 • 5 year warranty

LS-8SQ-TD 8'' LED Square Frame in / New construction / Dimmable(Traic) / 120V

LS-EM-4FT-2T840W*3CCT

LS- EM -4FT-2T840W*3CCT 3CCT LED 4FT STRIP LIGHT W/EMERGENCY BACKUP KIT LAMP WATTAGE : 40W INPUT VOLTAGE : 120-277VAC CRI : >80 3CCT/LUMENS (3500K-4200lm/4000K-4200lm/5000-4600lm) EFFICACY : LUEMENS /WATTS 105-115 FEATURES: UL: Suitable for damp locations. Dimming: Insolate 0-10v dimming driver 120-277V Lifespan: 50,000-hrs LED Lifespan, 5 Year warranty 3CCT Selectable : 3500K/4000K/5000K , surge protector. Low profile design optimizes shipping ,storage, and handing Quick release design for easy installation Polycarbonate milky lens diffuse uniform lighting distribution Available for suspended by steam cable ,surface mounted and connective in a long row Integrated smart sensor box and emergency battery are optional Corridor, Storage rooms, Offices, Conference rooms, Retailers ,Reception areas ,Hallways ,Parking Garages.

LS-EM-4FT-2T840W*3CCT/MS

LS-EM-4FT-2T840W*3CCT/MS 3CCT LED 4FT STRIP LIGHT W/EMERGENCY BACKUP KIT & MOTION SENSOR LAMP WATTAGE : 40W INPUT VOLTAGE : 120-277VAC CRI : >80 3CCT/LUMENS (3500K-4200lm/4000K-4200lm/5000-4600lm) EFFICACY : LUEMENS /WATTS 105-115 FEATURES: UL: Suitable for damp locations. Dimming: Insolate 0-10v dimming driver 120-277V Lifespan: 50,000-hrs LED Lifespan, 5 Year warranty 3CCT Selectable : 3500K/4000K/5000K , surge protector. Low profile design optimizes shipping ,storage, and handing Quick release design for easy installation Polycarbonate milky lens diffuse uniform lighting distribution Available for suspended by steam cable ,surface mounted and connective in a long row Integrated smart sensor box and emergency battery are optional Corridor, Storage rooms, Offices, Conference rooms, Retailers ,Reception areas ,Hallways ,Parking Garages.

LS-HBI-PIR Motion Sensor Integrated Motion Sensor Available for on/off and Dimming Control for Maximum Energy Savings

LS-MD-4''RND 4'' MUD IN ROUND PLASTIC TRIM ,LIGHT-WEIGTH. TRIM Compatible with LS-MDC-4/27K,30K,40K,50K MODULES.

LS-MD-4''SQ 4'' MUD IN SQAURE PLASTIC TRIM ,LIGHT-WEIGTH. Frame Compatible with LS-MDC-4/27K,30K,40K,50K MODULES.

LS-MDC-4/27K SIZE : 4'' INPUT VOLTAGE : 120VAC EFFICIENCY : 87 LAMP WATT : 9W LUMENS OUTPUT : 790lm COLOR TEMPETURE : 2700K CRI : >90 Features • The LED Module is made with Diecast, so it is appropriate for heat dissipation. • This LED Module is the form of replacement, so you can easily replace LED Module. • 3 Tension clips pre-installed on unit for easy installation. • LED Module can be rotated 440 degrees, tilted to 28 degrees. • Protected LED driver performs at 120V (120-277V available). • Dimming down to 10% with most dimmers (at 120V only). • CCT 2700K, 3000K, 4000K, 5000K available • CRI 90 • Long life LED chips guaranteed up to 50,000hours.

LS-MDC-4/30K SIZE : 4'' INPUT VOLTAGE : 120VAC EFFICINECY : 87 LAMP WATT : 9W LUMENS OUTPUT : 840lm COLOR TEMPETURE : 3000K CRI : >90 Features • The LED Module is made with Diecast, so it is appropriate for heat dissipation. • This LED Module is the form of replacement, so you can easily replace LED Module. • 3 Tension clips pre-installed on unit for easy installation. • LED Module can be rotated 440 degrees, tilted to 28 degrees. • Protected LED driver performs at 120V (120-277V available). • Dimming down to 10% with most dimmers (at 120V only). • CCT 2700K, 3000K, 4000K, 5000K available • CRI 90 • Long life LED chips guaranteed up to 50,000hours.

LS-MDC-4/40K SIZE : 4'' INPUT VOLTAGE : 120VAC LAMP WATT : 9W EFFICIENCY (LM/W) : 102 LUMENS OUTPUT : 920lm COLOR TEMPETURE : 4000K CRI : >90 Features • The LED Module is made with Diecast, so it is appropriate for heat dissipation. • This LED Module is the form of replacement, so you can easily replace LED Module. • 3 Tension clips pre-installed on unit for easy installation. • LED Module can be rotated 440 degrees, tilted to 28 degrees. • Protected LED driver performs at 120V (120-277V available). • Dimming down to 10% with most dimmers (at 120V only). • CCT 2700K, 3000K, 4000K, 5000K available • CRI 90 • Long life LED chips guaranteed up to 50,000hours.

LS-MDC-4/50K SIZE : 4'' INPUT VOLTAGE : 120VAC LAMP WATT : 9W EFFICIENCY (LM/W) : 92 LUMENS OUTPUT : 830lm COLOR TEMPETURE : 5000K CRI : >90 Features • The LED Module is made with Diecast, so it is appropriate for heat dissipation. • This LED Module is the form of replacement, so you can easily replace LED Module. • 3 Tension clips pre-installed on unit for easy installation. • LED Module can be rotated 440 degrees, tilted to 28 degrees. • Protected LED driver performs at 120V (120-277V available). • Dimming down to 10% with most dimmers (at 120V only). • CCT 2700K, 3000K, 4000K, 5000K available • CRI 90 • Long life LED chips guaranteed up to 50,000hours.

LS-MR-2810 Aluminum Profile 10FT Recessed Mount Length : 10ft Height and width (mm) 28*10 Max Watt Per FT 12W Installation : Recessed Mount Light Source Width : Max 20mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-MR-5414 Aluminum Profile 8FT Mud-In Length : 8ft Height and width (mm) 54*14 Max Watt Per FT 6W Installation : Mud-In Recessed Mount Light Source Width : Max 10mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-MR-6214 Aluminum Profile 10FT Mud-In Length : 10ft Height and width (mm) 62*14 Max Watt Per FT 12W Installation : Mud-In Recessed Mount Light Source Width : Max 10mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-MR-8820 Aluminum Profile 8FT Mud-In Length : 8ft Height and width (mm) 88*20 Max Watt Per FT 12W Installation : Mud-In Recessed Mount Light Source Width : Max 28mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

4'' Eye Ball LED Recessed Downlight Color Temp: 3000k Input Power: 10w = Equivalnet 75W / 35,000 Hours Input Voltage : 120v/60Hz Efficacy : 700lm Dimmable Powe Factor >0.9 UL Classified / Energy Star

LS-RC-100 Remote Control for Dimming Sensor Power 2* AAA 1.5 v Batteries

LS-S-1307 Aluminum Profile 10FT Length : 10ft height and width (mm) 13.*7 Max Watt Per FT : 6W Installation : Surface Mount Light Source Width : Max 10mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-S-1615 Aluminum Profile 10FT Length : 10ft height and width (mm) 16*15 Max Watt Per FT : 6W Installation : Surface Mount Light Source Width : Max 10mm LED Heat Sink : Silver PC Cover : Frosted Features • Custom lengths available. • Suitable for surface mount, mud-in recessed mount, 45 degree corner surface, recessed mount multiply applications. • Durable, long lasting. • Protects LED systems from dust, dirt and other elements. • Slim, low profile design. • Dissipates heat from LED system. • Lens options: frosted, clear. • Two (2) end caps included with every profile. • LED tape light sold separately

LS-T8/3K 4FT T8 Tube 3000k Wiring B Input Voltage 120-277 VAC Wattage 18w Lumens 2300lm Efficacy (lumens/watts) 129 CRI> 80 Wiring B Features UL, Damp Location Rated. DLC Approved 50,000 hours life (L70), 180* Beam Angle Glass with filming, Shatterproof Instant-on - and off. Uniform light distribution Fits into Existing Strip fixtures Type B and Type A/B (AMB with Ballast refer to compatibility list. With out ballast, Single and Double END) Available. 5 Year Limited Warranty Great for Offices, factories , warehouses, workshop ,supermarkets, airports, and other commercials application.

LS-T8/3K/AB 4FT T8 Tube 3000k Wiring A/B Input Voltage 120-277 VAC Wattage 15w Lumens 2300lm Efficacy (lumens/watts) 146 CRI> 80 Wiring A/B Features UL, Damp Location Rated. DLC Approved 50,000 hours life (L70), 180* Beam Angle Glass with filming, Shatterproof Instant-on - and off. Uniform light distribution Fits into Existing Strip fixtures Type B and Type A/B (AMB with Ballast refer to compatibility list. With out ballast, Single and Double END) Available. 5 Year Limited Warranty Great for Offices, factories , warehouses, workshop ,supermarkets, airports, and other commercials application.